Finding Your Ring Size
Looking for a ring for yourself or planning to pop the question to that special someone💍 but don’t know what size? 🤔
1. Measure your own ring to determine your ring size.
Take a well-fitting ring and measure the diameter of the inside of your ring.
For example: Size 18 corresponds with a diameter of 18 mm.
If you don't have a well fitted ring to determine the ring size you can measure your finger for the correct size:
2. Get one of our plastic ring sizers for just $1!
1. Make sure you use the correct finger on the correct hand. The fingers on our dominant hand are often larger than on the non-dominant hand
2. Put the end of the ring sizer through the “buckle”. Slowly pull it through until you have a large sized ring that you can easily put onto the finger
3. Put the ring sizer over the chosen finger and gently pull it tighter until you have the correct size
4. The measured ring size to use is the one on the inside of the buckle of the ring sizer
5. The correct size should allow the ring sizer to move over the knuckle without too much effort
6. If the gauge on the ring sizer shows a point between two sizes, use the larger one. It is better that a ring is a fraction too big, than too small
The entire process takes no more than 30 seconds, and the ring sizer belt is fully reusable.
Bonus: You can return your ring sizer after measuring and receive $1 off your purchase when you’re ready to buy the ring✨
Advice for buying a ring as a gift
Buying a ring as a gift can be tricky because you may not know the correct ring size. You can find out the ring size in different ways (unnoticed).
- Ask your partner, friends or family of the person if they know the ring size.
- Borrow one of the rings of the person (the correct finger) and measure it as described above or bring it in-store to be measured by a member of our team.
- Purchase our ring sizer for a quick and easy measurement.
